For this fixing method you should bear in mind the awning must have a pole sleeve long the edge of the awning which fits to the van. Many drive-away awnings do have this but be sure to check prior to purchase if this is the method you want to use. To fit the awning with pole and clamp method, pitch it and then insert the pole into the pole sleeve before clamping it into the gutter on the 'van.
When you want to drive away simply undo the clamps and slide the pole out of the sleeve. Firstly, you can purchase awning rail for DIY fitting choosing either J-Rail or C-Rail according to the type of awning you want to fit and whether you want the ability to easily disconnect and drive away.
If you don't want to have awning rail permanently fitted, or don't feel confident drilling your vehicle, there is now a magnetic awning rail kit available which is suitable for use with drive-away awnings. This kit comprises of sections of figure 8 and a magnetic strip to attach to your van.
To fit you slide one side of the figure 8 onto the beading of your awning and feed the magnetic strip into the other side. The magnetic strip is then placed on the wall of your 'van.
Sorry if we are stating the obvious but since this is a magnetic kit it is best suited to motorhomes and will only work on steel walls. It won't work on caravans or motorhomes with plastic, fibreglass or aluminium walls. If you have no rail on your van you have one final option for fitting an awning. Most drive-away awnings have eyelets on their connecting edge allowing you to use guyline to tie over the roof of the van or tie to a roof rack if you have one. This is the cheapest and simplest method of attaching an awning but bear in mind it does not give the best seal against the vehicle and it won't work with porch or caravan awnings.
You should also check to ensure the awning you want has eyelets prior to purchase if you want to use the method. Wind-out case awnings such as the Fiamma F45 are F65 are often heavier than other types of awning, come in rigid metal cases and require semi-permanent fixing to the wall or roof of your caravan or motorhome. Because of their weight and design, Case Awnings require a solid structure to mount to and some vans require vehicle specific fixing kits to ensure they are properly mounted and set at the right angle.
The average coach built motorhome that is equipped with the C rail is much higher from the ground than a caravan, so this is a further issue when trying to attach a Caravan awning to a motorhome. Call us 20 32 E-Newsletter Signup For special offers, updates and news of new products join our newsletter. Your awning will need regular reproofing — ideally every season.
Small patches can be treated with an aerosol proofer and should be applied when the awning is dry and in a well-ventilated place. For larger areas use a soft paint brush. Ideal conditions are a warm, dry day, but avoid hot sun which will dry the proofer out too quickly. Do not forget to protect vinyl windows, mudwalls, grass and tarmac while using products which contain spirit-based solvents.
Do not pack the awning away until the solvent has completely dried out. Don't forget we have a range of caravan advice and tips to help you get prepared for your next holiday. Whether you're staying at one of our many campsites in England , or are heading overseas, our guide will provide everything you need to make sure you're fully up to speed on all things caravan.
Find out more. Choosing a caravan awning Before setting off to one of our UK caravan sites , it's worth knowing that a full-size awning more than doubles the floor space of your touring caravan — providing extra room for storage and significantly increasing living space.
What type of awning do I need for my caravan? Is it a place to store wet clothes and wellington boots for holidays at home? Will it be put up by one person, or will several 'hands' be available? Are you restricted by the amount of weight you can carry in car or caravan?
Is the awning just for the caravan you have now, or might you want to keep it for another caravan? How often will you use it? What size awning do I need for my caravan? Information To calculate the exact length of awning, make sure the caravan is level and thread some nonstretch cord up through the awning channel so that it reaches the ground on both sides and measure this.
What material? This is what anyone contemplating an awning installation needs to be looking for. The hardware legs are vertically positioned without any obstruction, whilst the bottom brackets are firmly bolted into the sill panel of the caravan. The top brackets are close to the top, and the awning roll is free from sitting over windows and doors. TIP: When installing the top and bottom brackets, the installer needs to make sure they are being fastened into more than just sheeting.
Timber can sometimes be found in the sill panels of caravans. If not, then it needs to be added in the form of plywood behind the sill panel skin. The same goes for the top brackets. You may find that you will need to add some plates that measure around mm x mm x 3mm.
These can be made from aluminium, and simply fixed into place using silicone and pop-rivets. This method will allow for greater surface tension, thus the top bracket will have more bite. For more information on modifications see the footnote.
Deciding on the size It is important to understand how an awning is measured, and why the manufacturer labels a 12ft awning a 12ft awning. All awnings, if it be Dometic or Carefree are always measured from the centre to the centre of the awning arms. Never take the measurement of the fabric.
You will be 1 foot too short, and this could cause you some serious problems with clearance. The diagram below shows the correct way to measure, and the not so correct. Note: Measurement may vary slightly due to incorrect installation. Round to nearest foot.
0コメント